For full technical specification please call 01189 821 555

IN-LINE STRAINERS
For full technical specification please call 01189 821 555	The PTL-1SL in-line strainer is available in 2 versions. Opaque white bowl. Clear polymide to allow visual inspection Filter screens are 20 mesh stainless steel which are easily removable for cleaning. Ideal for use with DRAINMASTER, DRAINMAJOR and DRAIN-KING Waste Water Pumping systems with: Cleaners sinks Hairdressers hand basins etc.	Both strainers have 1 1/2 inch BSP female threaded conections to which are fitted plastic to male ion adapters for solvent weld 1 1/4 plastic waste pipe.

CHARCOVENT
For full technical specification please call 01189 821 555	Carbon/Charcoal Filter Braether Systems for venting Pump Technology waste water and sewage pumping systems where a vent to atmosphere is not possible. Contains an active carbon filter with highly absorptive powers ideal for removing unpleasent odours. Easy to Install Suitable for waste water systems without very hot water. Ideal for:- OFFICES, SCHOOLS, SHOPS, PUBS, RESTAURANTS, FACTORIES, HOSPITALS, WAREHOUSES, etc.	The CHARCOVENT should be fitted to tank using 11/4" pipework and a tank connector positioned through the side of the tank as high as possible from the base of the unit.

MICROVENT
For full technical specification please call 01189 821 555	Very hot water? For VERY HOT water and sewage pumping systems. Carbon Filter breather system for venting Pump Technology waste water and sewage pumping systems where a vent to atmosphere is not possible. Contains an active carbon filter with highly absorptive powers ideal for removing unpleasent odours. Easy to Install Suitable for waste water systems with very hot water. Ideal for systems where waste water is extremly hot (i.e. Commercial Dishwashers, Glasswashers etc.) in areas such as the following: OFFICES, SCHOOLS, SHOPS, PUBS, RESTAURANTS, FACTORIES, HOSPITALS, WAREHOUSES, etc.	Waste water pumping systems where waste water is EXTREMLEY HOT. Connect to min 2" pipework. Can be used with floor mounted sewage pumping systems.

HIGH LEVEL ALARM      (SIDE MOUNTED FLOAT)
	PTL1A High level alarm combined with a SIDE MOUNTED FLOAT used with floor mounted waste water systems e.g. DRAINMAJOR - DRAINKING.  Complete, ready to install.	The float must be positioned through the side of the GRP tank

HIGH LEVEL ALARM      (TOP MOUNTED FLOAT)
	PTL1B High level alarm combined with a TOP MOUNTED FLOAT used with floor mounted waste water systems e.g. DRAINMASTER  Complete, ready to install.	The float must be positioned through the indent point situated under the end coveron the top of the tank.

HIGH LEVEL ALARM      (NON MERCURY SWITCH FLOAT)
	PTL1C High level alarm combined with a NON MERCURY FLOAT used with below ground sewage or waste water systems e.g. PUMPMATIC  Complete, ready to install.	We recommend that the float is securely attached to the discharge pipework at a higher level than the activation level of the automatic float switch of the pump.

REMOTE HIGH LEVEL ALARM
For full technical specification please call 01189 821 555	PTL1D High level remote alarm used with floor mounted sewage systems e.g. EFFLU MAXI, EFFLU MIDI. These systems have volt free contacts on both single and dual pump versions. They are designed to be wired into the main Control Panel of Pump Technology Floor mounted waste water and sewage pumping systems.  Complete, ready to install.	240v. Can be connected to the building management system via the remote alarm terminals.