GXR, GXV

Stainless steel submersible pumps

GXR:

  • For clean water containing solids up to 10, 12 mm grain size.
  • For draining rooms or emptying tanks.
  • Extraction of water from ponds, streams or pits and for rainwater collection.
  • For irrigation purposes.

GXV:

  • For clean or slightly dirty water, containing solids up to 25 mm grain size.
  • Particularly suitable for liquids with a high solid content.

For outdoor use a power supply cable of not less than 10 m should be used in accordance with: EN 60 335-2-41.

calpeda logo
GXR_9_cavo_Calpeda

Key information

Datasheets

Product benefits

Comparison data

Key information

Execution

Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port.
GXR: with open impeller.
GXV: with free-flow (vortex) impeller.
Motor cooled by the pumped water passing between the motor jacket and the external jacket.
Double shaft seal with oil chamber.

Operating conditions

Liquid temperature up to 50 °C (40 °C per GXR 12..).
Maximum immersion depth: 5 m.
Minimum water level with float: GXR = 70 mm, GXV = 130 mm.
Minimum water level manual operation: GXR = 15 mm, GXV = 30 mm.
Continuous duty.

Datasheets

Download the Flygt datasheet

50 HZ Catalogue

Download →

60 HZ Catalogue

Download →

Instructions (Multilingual)

Download →

Product benefits

The Calpeda GXR and GXV series represent a premium, corrosion-resistant solution for water drainage, constructed primarily from high-quality AISI 304 stainless steel.

While both ranges share a compact, "plug-and-play" design, they are distinguished by their impeller types to suit different water conditions.

The GXR utilizes an open impeller for clean or slightly dirty water with solids up to 10–12mm, while the GXV features a vortex (free-flow) impeller, which creates a whirlpool effect to move liquids containing larger solids (up to 25mm) without the risk of clogging the pump housing.

A standout benefit of these ranges is the water-cooled motor, where the pumped liquid flows between the motor jacket and the external casing.

This design allows the pumps to operate continuously even when only partially submerged, making them ideal for complete tank drainage.

Equipped with a double shaft seal and an oil chamber, they offer high reliability for domestic irrigation, basement drainage, and industrial liquid transfer where durability and hygiene are priorities.

Comparison of the GXR & GXV Series

Feature GXR (Open Impeller) GXV (Vortex Impeller)
Best For Clean water / Light drainage. Dirty water / Wastewater with solids.
Max Solid Size Up to 10–12mm. Up to 25mm.
Construction Chrome-nickel stainless steel. Chrome-nickel stainless steel.
Cooling System Water-cooled for partial immersion. Water-cooled for partial immersion.
Efficiency Higher hydraulic efficiency. Higher clog resistance.