Ebara CDX(L)

Single-impeller centrifugal pump

Single-impeller centrifugal pump in AISI 304 and AISI 316 stainless steel, with radial impeller and components made by the hydroforming process that provides high resistance to corrosion.

The versatility of these electric pumps is due to the different types of mechanical seals that can be applied.

  • Domestic pressurisation
  • Small-scale garden irrigation
  • Washing
  • Water treatment
  • Cooling towers
  • Handling of clean water in general

Ebara CDX(L) Single-impeller centrifugal pump

Key information

Brochure

W

Materials

T

Technical data

Key information

AISI 304 stainless steel submersible pump with mechanical seal in Ceramic/Carbon/NBR and oversized oil chamber that increase the life and reliability.

Single impeller centrifugal pump with hydraulics in AISI 304 and AISI 316 stainless steel, with radial impeller, with hydraulics entirely in pressed AISI 304 or AISI 316 (L version), with hydroformed components, which ensure sturdiness, hydraulic efficiency and reliability.
The hydroforming process uses a high-pressure fluid (up to 1200 bar) to form the metal.

The hydraulic fluid, in our case water, with increasing pressure pushes the stainless steel to copy the shapes of the template until it comes into contact with the internal walls of the matrix that forms the mould. Hydroforming, which combines the power of a press with the force of water, has significant advantages over traditional processes, namely:

• Perfectly smooth shape
• Highly smooth running
• No welding points

These features ensure high corrosion resistance, high efficiency with performance above 80% and low losses.
The small size of CDX(L) electric pumps makes them suitable for narrow or difficult to reach spaces.
The versatility of these electric pumps is due to the different types of mechanical seals that can be applied.

  • Compact dimensions
  • Sturdy construction
  • Available in AISI 316

Ebara_CDX(L)

Brochure

Download the Ebara brochures

50Hz Databook

Download →

60Hz Databook

Download →

Instruction Manual

Download →

Optima Best Right DW Instruction Manual

Download →

Materials

Pump body Stainless steel AISI 304 (EN 1.4301) (CDX)
Stainless steel AISI 316L (EN 1.4404) (CDXL)
Impeller Stainless steel AISI 304 (EN 1.4301) (CDX)
Stainless steel AISI 316L (EN 1.4404) (CDXL)
Shaft Stainless steel AISI 303 (EN 1.4305) (CDX)
Stainless steel AISI 316L (EN 1.4404) (CDXL)
Mechanical seal Standard = Ceramic/Carbon/NBR
H = Graphite/Ceramic/FPM
HS = Silicon Carbide/Silicon Carbide/FPM
HW = Tungsten Carbide/Tungsten Carbide/FPM
HSW = Silicon Carbide/Tungsten Carbide/FPM
E = Graphite/Ceramic/EPDM
Motor support Aluminium

Technical Data

Flow rate from 1.2 to 15 m³/h
Total head from 37.5 to 12.5 m
Max. working pressure 8 bar
Max. temperature of the liquid -5°C ÷ +90°C for std versions
-5°C ÷ +110°C for H, HS, HW, HSW versions
-5°C ÷ +120°C for E versions
MEI > 0.4
Poles 2
Insulation class F
Protection degree IP55
Voltage Single-phase 1~230V ±10%
Three-phase 3~230/400V ±10%