Hidrostal PreroClean
Self Cleaning Sump Pump
- Wastewater pumping stations and shafts
- Pump sumps for water containing oil
- High performance washing systems
- Pump sumps with a high percentage of fat
- Pump sumps requring removal of floating items, such as styrofoam balls and feathers


Key information
Datasheets
Benefits
Key advantages
Key information
- Large, free cross section, which enables large solids to be pumped
- Steep and stable characteristic curve, which limits the flow under low discharge pressure
- Shutoff head typically twice the head at BEP, giving a large pressure reserve
- High efficiency reduces energy consumption and operating costs
- Non overloading power curves allow the use of small motors
- Low NPSHR characteristics
Specifications
- Discharge Sizes: 50 – 200 mm (3“ – 8“)
- Suction Sizes: 50 – 200 mm (3“ – 8“)
- Head: 0.5 – 60 m (2 – 200 ft)
- Flow: 2 l/s – 180 l/s (30 – 2‘850 gpm US)
- Power: 0.2 - 18 kW (0.3 – 24 HP)
- Frequencies: 50 Hz, 60 Hz, VFD
- Materials: Cast Iron, Ductile Iron, Hi-Chrome, Stainless Steel, Duplex

Datasheets
Download the datasheet
Brochure
Benefits
The core component of the Hidrostal PreroClean System is the proven blockage-free Hidrostal screw centrifugal pump.
The large channel from the pump entrance to the discharge port enables highly efficient blockage-free operation, which is resistant to large solids as well as long fibrous materials.
The screw centrifugal pump is shaped like a paddle wheel impeller, which is extended in the axial direction to form a large, free cross section with a soft transition from the axial to the radial flow direction.
The resulting sickle-shaped geometry of the scoop at the entrance is an important construction feature, making it an ideal choice for pumping wastewater.
Key advantages
Benefits
Unplanned maintenance work as a result of the build-up of f loating layers and the settling of solids in the sump pump are a thing of the past with the Hidrostal PreroClean system.
The system offers:
→ Use of the Hidrostal screw centrifugal pumps with an impeller geometry which has been developed especially for pumping fibrous material and solids.
→ Virtually complete draining of the sump with each pump cycle.
→ Skimming off of all the floating material on the surface, including such things as oils and fats, styrofoam balls and feathers, once per pump cycle.
→ Removal of all decomposing materials and significant suppression of odour formation, preventing this from affecting living areas.
→ Has a pump sump with a small base area so that all the solids that have settled can be flushed into the suction pieces of the pump by the residual flow veloaty.
