KSB Calio Pro
Dry-installed Pump
Maintenance-free high-efficiency flanged or screw-ended glandless pump with high-efficiency electric motor and continuously variable differential pressure control.
- Heating, ventilation, air-conditioning, cooling and circulation systems
- One-pipe systems and two-pipe systems
- Underfloor heating systems
- Boiler circuits or primary circuits
- Storage tank circuits
- Solar power systems
- Heat pumps


Key information
Datasheets
Technical data
Key information
- Outstanding energy efficiency
- The pump is future-proof through optimised efficiencies and exceeds the requirements of the energy efficiency regulations.
- Dynamic Control makes for an average of 40 percent additional energy savings as compared with proportional-pressure control.
- Easy to install and commission
- All operating modes, functions and setpoints can be set via buttons.
- Operating mode and setpoint can be configured in metres.
- Dual-pump operation and a venting function are integrated.
- The control panel can be locked if required.
- Fault messages are displayed clearly.
- Dynamic Control
- The efficient Dynamic Control operating mode lowers energy costs.
- Undersupply in changing system conditions is practically ruled out.
- Universal use
- The pump is ideal for replacing fixed-speed circulator pumps in larger buildings.
- One pump covers three pressure classes: PN6, PN10 and PN16.
- It provides for a broad application range for heating, ventilation, air conditioning, cooling and general recirculation systems.
- The glandless pump with continuously variable speed control is available with screwed or flanged ends.
- There are 25 sizes and 4 overall lengths.
- Dual-pump operation is integrated as standard for single pumps as well.
- Integrated alarm handling
- Operating reliability is increased through built-in pump and motor protection equipment.
- Fault messages are indicated on the display and signalled as general fault messages via a relay.

Datasheets
Download the KSB datasheet
Calio Pro
Technical data
Function: Pump
Connection type: External-thread connection, Flange
Drive concept: Electric actuator
Max. flow rate: 24 m3/h
Min. flow rate: 0.1 m3/h
Max. head: 12 m
Min. head: 1 m
Mains frequency: 50 Hz, 60 Hz
Mains voltage: 230V
Casing material: EN-GJL-200+CATAPHORESIS
Nominal pressure: PN 16
Max. allowed working pressure: 16 bar
Suction behaviour: Non-self-priming
Maximum allowable fluid temperature: 110 °C
Minimum allowable fluid temperature: -10 °C
