Pedrollo Top
Submersible drainage pumps for clear water
The TOP series is excellent for draining clear water without abrasive particles.
Recommended for emergency drainage of small, flooded areas (rooms, basements, garages), disposing of household water (dishwashers, washing machines), and emptying sumps.
Construction features ensure user-friendly and safe operation, including motor cooling and a double shaft seal.


Key information
Datasheets
Materials
Technical data
Key information
These electric pumps are recommended for conveying fresh water with no abrasive particles and no threadlike substances.
The permitted dimensions, for any solid bodies, are stated in "12 TECHNICAL DATA".
They are designed both for movable installations and for fixed installations in specific sumps or tanks, with: rigid or flexible piping, independent support on the bottom.
When discharging hot water, for example from washing machines and dishwashers, the electric pumps can withstand liquids with a temperature of up to 90°C but for a time of no longer than 3 minutes.
The D30, Dm 30 and all the DC, being equipped with a power supply cable 10 m long and covered with “H07 NR-F” grade rubber (Designation 245 IEC 66), can also be used for swimming pool cleaning and maintenance, for movable and outdoor installations.
The other models must have been ordered with the same type of cable but with a length of at least 10 m if they are to have the same use.

Datasheets
Download the Pedrollo datasheets
Technical Datasheet 50Hz
Technical Datasheet 60Hz
Installation & Use Instructions
Operating Instructions
Materials
| Pump housing | Technopolymer |
| Impeller | Noryl™ |
| Motor sleeve | – Stainless steel AISI 304 – Stainless steel AISI 316L (for TOP-LA) |
| Shaft | – Stainless steel AISI 431 – Stainless steel AISI 316L (for TOP-LA) |
Technical data
| Flow rate | up to 360 l/min (21.6 m³/h) |
| Head up | up to 15.5 m |
| Liquid temperature | up to +40 °C (+90 °C for intermittent service up to 3 minutes) |
| Capable of processing suspended solids | up to Ø 10 mm |
| Maximum operating depth below water level | – up to 3 m for TOP 1-2-3 – up to 5 m for TOP 4-5 |
| Draining capability | – up to 14 mm for TOP 1-2-3 – up to 30 mm for TOP 4-5 |
| Motor | 2 poles |
| Ingress protection rating | IP 68 |
