Wide Throat PC Pump
Progressive cavity pumps
Wide Throat type inlet allows gravity flow of highly viscous (plastico – Viscous) material on to the augur-on-coupling rod which pushes the substance to the pumping element. Wide Throat Pumps with the twin paddle bridge breaker arrangement at the top are designed for handling extremely difficult media with very high solid content and non – flowing properties.
Available in close coupled and bare shaft configuration. Custom designed hopper is also available on requirement. A variety of construction materials and shaft sealing options are also available.


Key information
Material options
Sealing options
Key information
Standard Hopper & Oversized Hopper
Capacity: up to 200 m3/hr
Pressure: up to 36 bar

Material options
WETTABLE HOUSING COMPONENTS:
• Cast Iron • Cast Stainless Steel • Fabricated Steel • Fabricated Stainless Steel
STATOR:
• Natural • Nitrile • High Nitrile • EPDM • Chloro-Sulphonated Rubber • Fluoroelastomer • Aflas • HNBR
ROTOR:
• Tool Steel • Case Hardened Steel • Alloy Steel • Stainless Steel
COUPLING ROD:
• Alloy Steel • Stainless Steel
SHAFT:
• Alloy Steel • Stainless Steel
OTHER EXOTIC MATERIALS:
• Duplex • Super Duplex • Alloy 20 • Haste Alloy
ROTOR SURFACE COATINGS:
• Ceramic Coatings • Tungsten Carbide • Hard Chrome Plating
PROTECTIVE COATINGS:
• Rubber Lining • Epoxy Coatings
Sealing options
ROTO SEAL CODE ‘N’
MEDIA PROPERTIES: Containing solids or with high viscosites, e.g. sugar, paper and waste water industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation and food applications.
DESCRIPTION: Single acting, unbalance, bi-directional and wave spring.
PRESSURE RANGE: Up to 25 bar.
ROTO SEAL CODE ‘P’
MEDIA PROPERTIES: Containing solids or with high viscosites, e.g. sugar, paper and waste water industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation and food applications.
DESCRIPTION: Single acting, unbalance, bi-directional and wave spring.
PRESSURE RANGE: Up to 25 bar.
ROTO SEAL CODE ‘R’
MEDIA PROPERTIES: Containing solids or with high viscosites, e.g. sugar, paper and waste water industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation and food applications.
DESCRIPTION: Single acting, unbalance, bi-directional and multiple spring.
PRESSURE RANGE: Up to 25 bar.
ROTO SEAL CODE ‘S’
MEDIA PROPERTIES: Containing solids or with high viscosites, e.g. sugar, paper and waste water industry.
APPLICATIONS: Oil, sewage water, clean water, corrosive applications, oil water separation and food applications.
DESCRIPTION: Single acting, unbalance, bidirectional, multiple spring.
PRESSURE RANGE: Up to 25 bar.
ROTO SEAL CODE ‘T’
MEDIA PROPERTIES: Low up to high viscosity with or without solids, abrasive, adhesives, crystallizing, aggressive and toxic media.
APPLICATIONS: Toxic media, food , pharma, sewage and ceramic slurries.
DESCRIPTION: Double acting, multiple spring, unbalanced and bi-directional.
PRESSURE RANGE: Up to 25 bar.
