Stormboost
Booster Pump
Boosting mains water pressure to properties using a combi-boiler
Ideal for properties with a single bathroom
STORMBOOST boosts existing mains water pressure by up to 2.5 bar and a maximum flow rate of 12 litres per minute.
The STORMBOOST Pump is designed to be connected directly to the incoming cold water mains and activates automatically when a tap is opened or a shower is switched on, boosting mains water pressure and flow throughout the property.
Featuring a highly reliable induction motor and a high quality brass pump head, STORMBOOST is supplied with two anti-vibration connection hoses and an extended 5 year warranty.


Key information
Datasheets
Technical Specification
Key information
Features
- 5 year warranty
- Mains pressure boosted by up to 2.5 bar
- Max pump output flow rate of 12 litres/min
- Patented integral bypass
- Switches on/off automatically
- High quality, robust brass pump body and impeller
- Anti-vibration connection hoses included
- Quiet operation
- Dry run protection
Datasheets
Download the Stuart Turner datasheets.
Datasheet
Intallation instructions
Technical Specification
| Product Code | 47708 |
| General | |
| GTIN | 5050400477082 |
| Warranty | 5 years (upon registration with proof of purchase) |
| WRAS | WRAS Approved Product |
| Kiwa | Kiwa Reg 4 Certified |
| Conformity certification | UKCA | CE |
| Technical Features | |
| Pump type | Peripheral |
| Mounting | Floor or plinth |
| Anti-vibration mounting feet | |
| Anti-vibration flexible hoses | |
| Dry run protection | |
| Typical noise* | 48 dB(A) |
| Performance | |
| Maximum head – closed valve | 3.2 bar (32 metres) |
| Maximum flow | 12 litres/min |
| Maximum working pressure** | 600 kPa (6.0 bar) |
| Maximum ambient air temperature | 40 °C |
| Min/Max water temperature | Min 4°C / Max 23°C |
| Flow switch sensitivity | 0.6 litres/min (approx) |
| Construction | |
| Pump head | Brass |
| Pump impeller | Brass |
| Pump head mechanical seal | EPDM / PTFE / Al Oxide |
| Connections | |
| Pump inlet/outlet | G ¾ M |
| Anti-vibration hoses | G ¾ F – 15mm push-fit (205 mm long) |
| Motor | |
| Type | Induction (thermal trip/auto reset) |
| Duty rating | Continous (S1) |
| Electrical | |
| Power supply (Vac/Ph/Hz) | 165-265 V a.c. / 1 / 50-60 Hz |
| Power consumption – P1 | 340 Watts |
| Current – full load | 1.5 Amps |
| Fuse rating | 5 Amps |
| Power cable length | 1.5 metres |
| Physical | |
| Enclosure protection | IPX4 |
| Length | 215 mm |
| Width | 148 mm |
| Height – excluding hoses | 262 mm |
| Weight – including fittings | 6.2 kg |
| * | The equivalent continuous A-weighted sound pressure level at a distance of 1 metre from the pump. |
| ** | The maximum pressure that can be applied to the pump under any installation conditions. |
