Pump Technology Catalogue 2019

29 56 Youngs Industrial Estate, Aldermaston, Berks. RG7 4PW Tel: 0118 9821555 Fax: 0118 9821666 E-mail: support@pumptechnology.co.uk Web Site: www.pumptechnology.co.uk HIGH LEVEL ALARMS for SEWAGE & WASTE WATER PUMPING SYSTEMS These units are designed for connection to a 240V supply circuit The alarm buzzer has a minimum volume of 80 dBA (at 1m distance). A rechargeable battery is fitted in case of mains electricity supply failure. PTL1A (SIDE MOUNTED FLOAT) USED WITH A FLOOR MOUNTED WASTE WATER SYSTEM e.g. DRAINMINOR DRAINMAJOR The float mechanism provided must be attached through the side of the GRP tank and positioned in an area away from the inverts from sinks, dishwashers, glasswashers etc. to prevent ingress of water inadvertently actuating the horizontal float switch mechanism. PTL1B (TOP MOUNTED FLOAT) USED WITH A FLOOR MOUNTED WASTE WATER SYSTEM e.g. DRAINMASTER. The float mechanism provided must be attached through the indent point situated under the end cover on the top of the tank. PTL1C (NON MERCURY SWITCH FLOAT) USED WITH BELOW GROUND SEWAGE OR WASTE WATER PUMPING SYSTEM e.g. PUMPMATIC. A float and weight is provided to activate the High Level Alarm. We recommend that the float is securely attached to the discharge pipework at a higher level than the activation level of the automatic float switch of the pump. PTL1D (REMOTE ALARM) USED WITH FLOOR MOUNTED SEWAGE SYSTEMS e.g. EFFLU MAXI, EFFLU MIDI These systems have volt free contacts on both the single and dual pump versions. They are designed to be wired into the main Control Panel of Pump Technology Floor Mounted Waste Water and Sewage Pumping Systems.