11
Pump Technology Ltd. can specify and
supply a wide range of
MACERATOR, SEWAGE, DRAINER &
WASTE WATER PUMPING SYSTEMS.
56 Youngs Industrial Estate, Aldermaston, Berks. RG7 4PW
Tel: 01189 821555 Fax: 01189 821666
E-mail:
Web Site:
What skills are needed to install a probe?
Only reading the instructions! Probe installation is easily
achieved without the need to enter the wet area.
The probe is simply lowered in from the top and suspended
by its own cable, using the mounting kit supplied.
Install near the inflow, not in the quietest part of the well!
How do I calibrate it?
No calibration required. No waiting for the well to empty and
fill.
You can choose the start, stop and alarm points and you can
see where they are.
How much maintenance does it need?
Usually very little or none. Install it near the inflow and it stays
relatively clean.
If there is any build up, it occurs on the activation sensor and
rarely affects the operation.
How reliable is it?
Ultra-reliable. There are no moving parts and no electronics,
so it will last for 20+ years. That's why it gets a 10 year
warranty.
No other level sensing device comes close.
What control devices can use it?
Anything that measures conductivity:
For lift stations underwater/wastewater utility control - try the
MultiSmart Pump Station Manager
For smaller sumps and storm water applications with 2 pumps
where no monitoring is required, try the MTDPC* pump
controller
For 1 and 2 pump applications with no alternation use the
MTIC*
For the simplest control, you can use the MTR* family of
relays.
NOTE
If retrofitting a PTL MultiProbe unit check with Pump
Technology Ltd Technical Staff on 0118 9821555
This is a Pump Technology PTL
MultiProbe suspended in a Waste
Water Pumping Station.
Simple to:
INSTALL, CLEAN & MAINTAIN
This probe was still
fully operational
despite the build-up.
The operator is
pulling the probe
through the standard
cleaning bracket to
clean off the build-
up.
PTL MULTIPROBE
for water & wastewater
