FLOORMASTER
UNDERFLOOR
, MINI, WASTE WATER PUMPING SYSTEM
IF YOU HAVE ANY INSTALLATION QUERIES PLEASE TELEPHONE OUR TECHNICAL DEPT. BEFORE INSTALLATION.
Due to a policy of continuous product improvement we reserve the right to alter specifications without notice
Description
Tank:
Waterproof PE-tank (Polyethylene), (70 I), with 2 inlet
sockets (DN 100), sockets for vent pipe (DN 70) and
discharge PVC-pipe 40 mm.
Installation:
The tank should be flush mounted in concrete.
The adjustable cover will compensate for the thickness of the
floor covering. Screw the supplied pipe connection into the
pump and cut the pipe length. Join the pump to the rubber
discharge elbow in the tank. Pull the pump cable through the
vent pipe up to the T-piece and close the aperture with the
supplied rubber plug.
Delivery:
PE-tank with level adjustable cover, with inlet, vent,
and discharge sockets, drain trap for floor drain, pipe
connector and mounted reflux valve.
Application
This is the ideal and quick solution for a built-in waste water
sump in utility and storage rooms situated in basements.
The pressure-proof plastic tank is just placed in the concrete
footing and cemented in with the inlets and outlets.
The automatic level control switches the pump on and off
dependent on the water level. Only a faint hum is heard
when the pump is operating, therefore disturbing noises are
not evident, even at night.
The
FLOORMASTER
comes complete with a one year
warranty. In the unlikely event of technical difficulties,
please ring:
Pump Technology Limited on 01189 821555
IMPORTANT: This unit is not designed to
handle sewage. Please enquire about our
packaged sewage pumping systems.
Performance
Delivery head [m]
1
2
3
4
5
6
7
8
9
10 11
PTL30
6.5 5.5 4.5 3.5 2.5
m3/h
PTL60
15.5 14 12.5 10.5 8.5 6.5 4
1.5
PTL60
17.5 16 14.5 13 11 9
7
4
1
PTL62
19 17 15 12 10 8
6
4
2
PTL62
22 20 17 15 12 10 8
6
4
3
PTL102
28 26 23 21 19 17 15 12 10 8
5
PTL730
19 17 15 12 10 8
6
4
PTL730
22 20 17 15 12 10 8
6
4
1
Floor level compensation
The cover with round throat
shoulder in the shaft
opening can be aligned
vertically and rotationally.
Sealing between tank and
cover is achieved by a round sealing cord. This makes it
possible to adjust the Floormaster to the effective top edge
of floor coverings laid later e.g. tiles.
Extended floor level compensation (adjusted by the
customer)
If required, the
installation depth
can be additionally
increased up to
approx. 350 mm by
the customer, using
a commercial 300
mm dia. PVC pipe.
The PVC pipe is
inserted into the tank instead of the cover frame. The frame is
then pushed into the socket of the PVC pipe.
Odour trap
An odour trap is
provided as standard
for the floor drain. The
necessary syphon
components form part
of the scope of supply.
TO SELECT THE APPROPRIATE PUMP FOR
YOUR INSTALLATION, PLEASE CONTACT THE
PUMP-TECHNOLOGY HELPLINE
ON 01189 821555
The larger pumps are available EX - Explosion Proof - ring for details
Type of
kW
kW
F.L.C.
Motor
Type
Current
Voltage Input
Output
RPM
Amp.
Protection
PTL30
1-phase 230 V 0.32 kW 0.20kW 2720 min-1
1.4 A
PTL60
1-phase 230 V 0.70kw 0.45 kW 2600 min-1
3.4 A
PTL60
3-phase 400 V 0.75 kW 0.58 kW 2750 min-1
1.3 A
incorporated
PTL62
1-phase 230 V 0.83 kW 0.50 kW 2500 min-1
3.9 A
in motor
PTL62
3-phase 400 V 0.85 kW 0.65 kw 2715 min-1
1.4 A
PTL102
3-phase 400 V 1.36 kW 1.02 kW 2550 min-1
2.0 A
PTL730
1-phase 230 V 0.83 kW 0.50 kW 2500 min-1
3.9 A
PTL730
3-phase 400 V 0.85 kw 0.60 kw 2705 min-1
1.5 A
1-phase
1-phase
3-phase
1-phase
3-phase
3-phase
1-phase
3-phase
32
For Flow Rates, see Page 35
