What is the minimum inlet height?
From 110mm to 185mm, depending on the pump selected. This ensures the suction to the pump is always flooded and prevents the possibility of air locking. An inlet should be provided to both tank sections.
What material is the tank made from?
Recyclable Polyethylene. The tank is rigid, easier to drill tank connections into, and the sides of the tank are less likely to congeal with fats and grease.
How does the lid fit?
No tools are required to remove the lid. It’s held in place by 4 off stainless hand screws. Two lids one for each tank compartment.
What size is the tank?
Rectangular, 820mm L x 410mm W, 445mm H
What is the difference between the DrainMajor Duo and DrainKing?
Both will offer a duty standby assist pump operation. With the Duo each pump will operate independently, the pumps float arm position causing the pump to start and stop. If one pump should fail, fluid would overflow into the adjacent [...]
How high and how far can I pump?
Depending on pump, max closed valve head is 13m, max flow rate 7.9 L/S.
What is the maximum solids sizes?
Depending on the pump, 10mm to 30mm soft solids.
What pump or pumps fit into the tank?
An automatic submersible Jung Pumpen U3K, U3K Special, U5K, U6K, US73HE /103HE and US73HES / 103HES (Rated for liquid temperatures 90 deg c)
What is the minimum inlet height?
From 110mm to 185mm, depending on the pump selected. This ensures the suction to the pump is always flooded and prevents the possibility of air locking. An inlet should be provided to both tank sections.
What material is the tank made from?
Recyclable Polyethylene. The tank is rigid, easier to drill tank connections into, and the sides of the tank are less likely to congeal with fats and grease.
