Light drainage pump type ABS Robusta

For the smaller pumping challenges

The Robusta 200 and 300 models are plug-in, submersible pumps designed to remove wastewater containing solids up to 10 mm. The pump and motor form a pressure-tight encapsulated fully flood-proof unit .

For a longer service life, the high head version of Piranha S has a reversible cutter that can be rotated. The cutter face can be used on each sides before the cutter needs replacing.

Adjustable bottom plate on Piranha PE and S
To counteract the effects of wear and to maintain efficiency, the optimum clearance between the bottom plate and the impeller can easily be restored.

  • Thermal sensors
  • Three lip seals lubricated by a grease chamber
  • Protection type IP 68
  • Stainless steel rotor shaft supported in lubricated-for-life ball bearings
  • Motor housing made of corrosion-resistant material, and the outer jacket and impeller of durable plastics
  • 60 Hz version available with approval (UL, CSA)


Main applications

  • Domestic and commercial wastewater without toilet waste
  • Drainage of pits and flooded cellars

Main benefits

  • Pumps down to 3 mm when the detachable suction ring is fitted into the screen
  • Easy installation with Schuko plug and 10 m cable
  • Automatic operation with built-in float switch for reliable operation
  • Backflow is prevented with built-in check valve
  • Fits in small sumps from 300 x 300 mm
  • Suitable for both manual and automatic operation with the unique hand/auto switch
Go to Top