Light wastewater pump type ABS MF 154HW

Pump away at high temperatures

The MF 154HW is a compact submersible hot water pump for the removal of domestic and commercial high temperature wastewater. The pump is equipped with vortex hydraulics for blockage-free pumping in applications where the temperature of the medium exceeds the standard upper limit (40 °C) to a maximum allowable temperature of 80 °C.

  • Fitted with a water tight, fully flood-proof cast iron motor and a hydraulics section
  • Thermal sensors
  • Oil-lubricated mechanical seal medium side; oil-lubricated lip seal at motor side
  • Stainless steel rotor shaft supported in lubricated-for-life ball bearings
  • Easy fit plug-in cable connection, fitted with Schukoplug

Description

Main applications

  • Pumping of high temperature discharge water from laundries, commercial dishwashers and washing machines.
  • Filling and emptying of containers, drainage of flooded cellars and removal of rainwater.
  • Suitable for use in septic tanks and pumping effluent from locations below the backwash level in accordance with EN 12056.
  • The vortex hydraulics are particularly suitable for the pumping of fluids containing gaseous or abrasive particles.
  • Can be used in lifting station type ABS Sanimax

Main benefits

  • Maximum allowable temperature is 80 °C
  • Passage of solids up to 20 mm
  • Compact shape, fittings for easy mounting, and small sump requirements enable a quick and cost-effective installation
  • Designed to cover a wide range of internal and external dewatering applications
  • Primarily where the temperature of the medium exceeds the standard upper limit
Go to Top