For the smaller pumping challenges
The Robusta 200 and 300 models are plug-in, submersible pumps designed to remove wastewater containing solids up to 10 mm. The pump and motor form a pressure-tight encapsulated fully flood-proof unit .
For a longer service life, the high head version of Piranha S has a reversible cutter that can be rotated. The cutter face can be used on each sides before the cutter needs replacing.
Adjustable bottom plate on Piranha PE and S
To counteract the effects of wear and to maintain efficiency, the optimum clearance between the bottom plate and the impeller can easily be restored.
- Thermal sensors
- Three lip seals lubricated by a grease chamber
- Protection type IP 68
- Stainless steel rotor shaft supported in lubricated-for-life ball bearings
- Motor housing made of corrosion-resistant material, and the outer jacket and impeller of durable plastics
- 60 Hz version available with approval (UL, CSA)