0118 9821 555

Call now, no waiting | Answers immediately

Nationwide Delivery: Fully Stocked Warehouse

Mon to Fri: 9:00am – 5:00pm: Same Day Despatch

Call Our Team To Order: 0118 9821 555

DrainMajor Duo2021-09-20T10:59:15+00:00

DrainMajor Duo

Ideal for:

Busy bar – Limited space – Dependability without fail.

DATASHEET
Drainmajor Duo Datasheet
BROCHURE
Drainmajor Range Brochure
O&M MANUAL
Drainmajor Duo Installation Manual

Two linked DRAINMAJOR systems providing peace of mind with AWESOME POWER!

  • Flexible, Quiet and Powerful.
  • Corrosive chemical resistant.
  • Clip-on lid for instant access.
  • High water level alarm available.
  • 10mm solids handling.
  • Pumps head of up to 8m.
  • 40mm discharge pipe work.
ACCESS THE 3D BIM LIBRARY

Frequently asked questions

What is the difference between the DrainMajor Duo and DrainKing?2021-06-23T08:19:58+00:00

Both will offer a duty standby assist pump operation. With the Duo each pump will operate independently, the pumps float arm position causing the pump to start and stop. If one pump should fail, fluid would overflow into the adjacent tank, the other pump would then be activated by its float arm. This configuration does not require a control panel. The king has both pumps in a single tank, separate floats control the operation of the pumps via a duty standby, assist control panel. The panel will also cycle the lead duty pump. Both systems are fitted with alarms with BSM connection.

How high and how far can I pump?2021-06-23T08:19:15+00:00

Depending on pump, max closed valve head is 13m, max flow rate 7.9 L/S.

What is the maximum solids sizes?2021-06-23T08:18:33+00:00

Depending on the pump, 10mm to 30mm soft solids.

What pump or pumps fit into the tank?2021-06-23T08:20:41+00:00

An automatic submersible Jung Pumpen U3K, U3K Special, U5K, U6K, US73HE /103HE and US73HES / 103HES (Rated for liquid temperatures 90 deg c)

What is the minimum inlet height?2021-06-23T08:20:46+00:00

From 110mm to 185mm, depending on the pump selected. This ensures the suction to the pump is always flooded and prevents the possibility of air locking. An inlet should be provided to both tank sections.

What material is the tank made from?2021-06-23T08:16:25+00:00

Recyclable Polyethylene. The tank is rigid, easier to drill tank connections into, and the sides of the tank are less likely to congeal with fats and grease.

How does the lid fit?2021-06-23T08:15:53+00:00

No tools are required to remove the lid. It’s held in place by 4 off stainless hand screws.  Two lids one for each tank compartment.

What size is the tank?2021-06-23T08:15:16+00:00

Rectangular, 820mm L x 410mm W, 445mm H

Let Pump Technology Ltd take the strain: One Company, One Solution, One CALL

To get technical help for the right specification the first time, call 0118 982 1555 and talk to a real person

LEAVE A MESSAGE

Go to Top