DrainKing
Ideal for:
Offices, Schools, Shops, Pubs, Restaurants, Factories, Hospitals, Warehouses, etc.
Waste water pumping system using Single or Dual pumps
Very hot water? Waste disposal unit? NO PROBLEM! Specially designed for commercial or industrial kitchens with commercial dish/glass washers, washing machines or cleaners sinks.
DEPENDABILITY AND POWER !
- Complete, ready to install.
- Quiet and very Powerful
- Corrosive chemical resistant
- Lid enables easy cleaning and maintenance.
- Control Panel with Alarm and BMS interface.
- Extremely hot water ‘H’ option. Check specification with our technical department.
- Up to 30mm solids handling.
- Pumps head of up to 10m.
- 32, 40 or 50mm discharge pipe work.
- W x H x D mm
- 720 x 420 x 720
DrainKing 30SL Twin (240v)
Part No 171NS 
DrainKing 30 Twin (240V)
Part No 170NS
DrainKing 60 Twin (3ph)
Part No 172NS
DrainKing 60 Twin (240V)
Part No 173NS
DrainKing 730 HES Twin (240V)
Part No 178NS
DrainKing 730 Twin (3ph)
Part No 174NS
DrainKing 730 Twin (240V)
Part No 175NS
DrainKing 1030 HES Twin (240V)
Part No 179NS
DrainKing 1030 Twin (3ph)
Part No 176NS
DrainKing 1030 Twin (240V)
Part No 177NS
DrainKing O&M Manual
Frequently Asked Questions
Both will offer a duty standby assist pump operation. With the Duo each pump will operate independently, the pumps float arm position causing the pump to start and stop. If one pump should fail, fluid would overflow into the adjacent tank, the other pump would then be activated by its float arm. This configuration does not require a control panel. The king has both pumps in a single tank, separate floats control the operation of the pumps via a duty standby, assist control panel. The panel will also cycle the lead duty pump. Both systems are fitted with alarms with BSM connection.
Depending on pump, max closed valve head is 13m, max flow rate 7.9 L/S.
Depending on the pump, 10mm to 30mm soft solids.
An automatic submersible Jung Pumpen U3K, U3K Special, U5K, U6K, US73HE /103HE and US73HES / 103HES (Rated for liquid temperatures 90 deg c)
From 110mm to 185mm, depending on the pump selected. This ensures the suction to the pump is always flooded and prevents the possibility of air locking. An inlet should be provided to both tank sections.
Recyclable Polyethylene. The tank is rigid, easier to drill tank connections into, and the sides of the tank are less likely to congeal with fats and grease.
No tools are required to remove the lid. It’s held in place by 4 off stainless hand screws. Two lids one for each tank compartment.
Let Pump Technology Ltd take the strain: One Company, One Solution, One CALL
To get technical help for the right specification the first time, call 0118 9821 555
